They will have a leverset on either side of the door and this will retract the latch when turned or depressed.Ĭylindrical locks are relatively easy to installed and can usually be done fairly quickly. These are also used in residential buildings, but are typically a lower grade hardware. They’re designed to be installed through the door. Cylindrical LocksĬylindrical locks are also very common in commercial construction, but these guys are typically used on interior doors. Mortise locks are more complicated than cylindrical locks and often require a technician for installation and maintenance. Lastly, there’s a keyed cylinder which operates the locking function of the lock body.A mortise lock also has a strike plate, which is used to reinforce the pockets placed in the frame and the latch can extend inside to secure the door.You also have the lock trim, which is similar to other lock trims (levers, handlesets, pulls, etc.).The “mortise” is a pocket that’s cut out of the door itself and the lock body is fitted inside that pocket in the door. You have the actual lock body, which is the part that’s installed inside the mortise. Mortise locks are almost always used in commercial construction, especially on exterior doors and there are several parts included in a typical mortise lock installation. These two locks have pretty big differences, but are very easy to understand once you get the basics down. Mortise and cylindrical locks are two of the most common locks used in the industry, but just like everything else, there’s a time and a place where they’ll work best. It’s a clean slate, and what better way to start off a clean slate than by reviewing a little lock terminology?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |